1.How to get dense cloud?

Please load grounded herbs as more as you can into the chamber and press it a little with the tool in the packing box, and then turn on the device, when it is ready, inhale it every 8-10 seconds.

Actually, people need THC and CBD from the cannabis which make them high or to achieve the role of medical treatment, and in fact, the more THC and CBD will be released at the lower temps like 356 °F . However, most of people don't like the lower temps because it could not produce enough cloud. Our suggestion is that you can turn on device and vape at lowest temps for 2-3 mins , inhale every 8-10 seconds , then change the temps to the third level for another 2-3 mins, and then change it to 4th or fifth level ....

2.How to fill water into the bubbler attachment?

Fill a cup with water, insert the bottom of the waterpipe into the water, then use your mouth to draw water up from the top/ mouthpiece of the bubbler attachment and remove the bubbler attachment from the water cup during the suction process while continuing to inhale, so that air will enter the water pipe and create bubbles. This will ensure that the water in the water pipe will not flow out.

After the water pipe is filled with water, please shake the water pipe a few times to shake off excess water, and then wipe off any water remaining on the inner and outer wall of the water pipe. The shaking process is also to ensure that no water leaking out during the use of the water pipe.

Cleaning: Use your mouth to Blow out the water from the top/ mouthpiece of the bubbler attachment, 

3.How to disassemble the mouthpiece of Origin dry herb vaporizer.